This page connects federal agencies to Federal Energy Management Program (FEMP) carbon pollution-free electricity (CFE) resources and provides information to increase federal agency understanding of on-site and off-site CFE options. Additionally, the steps outlined below represent a comprehensive approach to CFE planning and procurement.

Assess to understand site utility markets and CFE usage; Strategize to identify feasible, impactful pathways to increase CFE; Implement to execute procurement strategies for CFE.

Assess

Assess the options available to your site based on the utility regulatory environment in which it is located. Available options will differ depending upon the market structure.

Understand agency electric utility regulatory environment

Have a question?

Utility regulatory markets in the United States are typically determined at the state level and generally fall into one of two types: (1) vertically integrated markets (sometimes referred to as "regulated markets"), and (2) retail electric choice markets (sometimes referred to as "deregulated markets" or "competitive markets").

The CFE procurement options for these market types differ and will be discussed in detail under the Strategize section, below. Figures 1 and 2 illustrate the differences between the market structures.

In vertically integrated markets, the serving utility is responsible for generation, transmission, and distribution of electricity. Customers receive all services including commodity electricity from their serving utility. A site's serving utility is determined by its geographic location.

Graphic shows the progression from utility owning generation to GSA AWC or Separate Contract to the customer.

Figure 1. Vertically integrated market overview.

Exception: Electric cooperatives and municipalities are generally structured as vertically integrated providers.

In retail electric choice markets, customers can choose their electricity supplier and work with GSA or DLA Energy for their commodity electricity purchases, which will be aggregated with other federal loads.

The following states have either complete or partial retail electric choice: California*, Connecticut, Delaware, Illinois*, Maine, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Ohio, Oregon, Pennsylvania, Rhode Island, Texas*, Virginia*, and Washington, D.C.

*Electric choice may not be available in all parts of the state or for all customers.

Graphics shows independently owned generators moving to GSA or DLA-Facilited Contracts to GSA AWC or Separate Contract to the customer.

Figure 2. Retail electric choice market overview.

ACTION: Categorize sites based on the regulatory market in which they are located (e.g., retail electric choice, vertically integrated). Because individual states regulate electric utility purchases and sales within their borders, the rules and options regarding the purchase of electricity will vary depending upon a site’s geographic location.

Consider future load

Reminder: Fleet electrification, data centers, and supercomputers will increase your load.

Project future electricity load for each site. This is particularly important when there are plans for a significant increase or decrease in annual electricity consumption due to changes in facility usage or mission, for example. For sites planning to increase their electric vehicle fleet, the EV U-Finder resource can help federal agencies locate which utilities are operating in a specific zip code and which incentives are offered by those utilities.

Strategize

Identify feasible, impactful pathways to increase CFE.

Understand potential for additional on-site CFE generation capacity

On-Site CFE Projects

Inventory

Take an inventory of available information related to on-site CFE.

  • Do your sites have available real property that could be used to site CFE generation (e.g., rooftop, parking structures, adjoining land)?
  • Agencies seeking to develop government-owned on-site CFE projects:
    • If appropriations are available for the installation of on-site CFE generation projects:
      • Leverage available FEMP resources to support your efforts. Utility regulations can be complex, and FEMP can help you navigate the options.
    • If appropriations are not available for the installation of on-site CFE generation projects:
      • Determine if a comprehensive performance contract project that includes CFE generation is feasible for your site. Leverage FEMP resources regarding third-party financing for on-site distributed energy projects (e.g., ESPC, UESC). Ensure the project is comprehensive and includes energy and water efficiency measures in addition to CFE generation.
  • Agencies seeking to develop third-party owned on-site CFE projects:
    • Would your Agency consider hosting utility- or privately-owned CFE generation on your land? Refer to the Annual Energy Management Data Reporting guidance for information regarding third-party owned on-site generation that is consumed by the site.

FEMP Resources

Refer to the following FEMP resources for more information and technical assistance.

Performance Contracting Options

Performance contracts are a useful strategy for installing energy conservation measures that increase energy and water efficiency as well as installing CFE projects at federal sites without upfront capital funding.

The Energy Act of 2020 amended 42 U.S.C. § 8253(f)(4) to include a new requirement for federal agencies to implement all life-cycle cost-effective energy- or water-saving measures identified in a federal agency's evaluation of a federal facility subject to the requirements of 42 U.S.C. 8253(f) ("covered facility") not later than two years after the completion date of the evaluation. Further, at least 50% of the project implementation must be accomplished through performance contracts such as energy savings performance contracts (ESPCs) and utility energy service contracts (UESCs).

Refer to the following FEMP resources for more information:

  • Federal On-site Distributed Energy Project Financing Options: Description of distributed energy project financing options
  • ESPC: Details performance contracting mechanism to procure energy savings and facility improvements with no upfront capital costs through a partnership between an agency and an energy service company
  • ESPC Energy Sales Agreement: Details use of the multiyear ESPC authority to implement distributed energy projects on federal buildings or land
  • UESC: Details the limited source acquisition between a federal agency and serving utility for energy management services.

Identify Current Electricity Procurement Strategy

Identify how sites take electric service. Part of a comprehensive plan to achieve CFE goals is an understanding of how contract expirations provide opportunities to move towards increased CFE consumption.

Vertically Integrated Markets

Agencies should understand the rate schedule, tariff, or separate contract under which they take electric utility service. Agencies will most commonly take electric service via a Task Order issued by the Agency under the appropriate GSA Areawide Contract (AWC). Pursuant to Federal Acquisition Regulation (FAR) Part 41.204(c), using the GSA AWC is required unless determined by the Agency Head Contracting Authority that its use is not advantageous to the Government. Where no GSA AWC exists, sites will have negotiated separate contracts or interagency agreements in accordance with FAR Part 41.205; FAR Part 41.206.

ACTION: Take note of the following in vertically integrated markets.

  • Sites with expiring electricity contracts
  • Sites served by a utility with a GSA AWC that are not taking service via a task order under the AWC
  • Sites taking electric service under a separate contract.

 

Retail Electric Choice Markets

DLA Energy and GSA serve as centralized electricity procurement agents for federal customers in retail electric choice markets. Agencies should identify if DLA Energy or GSA currently procures commodity power for the site. Where sites are located in retail choice markets, but do not procure electricity through DLA Energy or GSA, agencies should contact DLA Energy or GSA for information on how to participate in aggregated federal procurements.

ACTION: Take note of the following in retail electric choice markets.

  • Sites with expiring electricity contracts
  • Sites that are not aggregating their load through DLA Energy and/or GSA
  • Sites in retail electric choice markets that don’t competitively procure their electricity supply (meaning their electricity is supplied by their distribution utility).

Understand Options for Off-Site CFE Procurement

Process flow diagram for how off-site energy purchases flow to utility markets down to procurement options.

Off-site CFE options are market dependent, though some options are available in both vertically integrated and retail electric choice markets.

Implement

Implement energy efficiency measures, off-site CFE procurement, and on-site CFE generation and/or energy storage projects.

Execute strategies to increase on-site CFE generation

Increase on-site CFE generation where projects are cost-effective and scalable. On-site projects may provide additional opportunities for energy efficiency or to electrify other carbon-intensive site loads, which may help agencies meet other goals.

Execute strategy to increase CFE for sites in vertically integrated markets

Examine available CFE options by utility. Ensure available green tariff or green pricing programs will count towards your goals, and switch to these programs if available to the site's customer class.

Execute strategy to increase CFE for sites in retail electric choice markets

Ensure all commodity requirements are coordinated with GSA or DLA Energy for inclusion in their regional procurements.

Report CFE usage

Detail annual electricity use through the Annual Energy Management Data Report workbook. Follow FEMP Annual Energy Reporting Guidance.

Measure progress

On an annual basis, assess the achievement of agency annual targets and the success of various procurement strategies and adjust as needed to stay on track.

Key Resources

Recommended FEMP Courses

Need Assistance?

Need energy management guidance? Can't find a document or tool? FEMP can help. Ask FEMP a question.