FY 2020 Advanced Methods for Manufacturing Program Review Meeting

The Advanced Methods for Manufacturing (AMM) program held its annual review meeting December 2-3, 2020 via webinar.

March 2, 2021

The Advanced Methods for Manufacturing (AMM) program held its annual review meeting December 2-3, 2020 via webinar. The purpose of this meeting was to 1) provide Principal Investigators (PIs) and researchers the opportunity to deliver a summary of their project achievements to DOE, and 2) highlight to industry and other researchers the AMM project accomplishments and advantages, leading to potential collaborations and adoption of AMM technologies.

Integrating Dissolvable Supports, Topology Optimization, and Microstructure Design to Drastically Reduce Costs in Developing and Post-Processing Nuclear Plant Components Produced by Laser-based Powder Bed Additive Manufacturing (32.29 MB)
Machine Learning based Processing of Thermal Tomography Images for Automated Quality Control of Additively Manufactured Stainless Steel and Inconel Structures (3.1 MB)
Real Time Non Destructive Evaluation During 3D Manufacturing of Metal Parts (1.12 MB)
Irradiation Testing of Materials Produced by Additive Friction Stir Manufacturing (2.62 MB)
Performance of SiC-SiC Cladding and Endplug Joints under Neutron Irradiation with a Thermal Gradient (3.66 MB)
Diffuse Field Ultrasonics for In Situ Material Property Monitoring During Additive Manufacturing Using the SMART Platform (1.42 MB)
Small Modular Reactor Pressure Vessel Manufacturing and Fabrication Technology Development (9.14 MB)
Establishing Modular In-Chamber EB Welding (MIC-EBW) Capability for Thick Section Components (4.35 MB)
Advance Methods for Manufacture Program (2.21 MB)
Additive Manufacturing of SMR Holddown Springs and Upper Nozzle Interfaces (8.72 MB)
Enhancing Irradiation Tolerance of Steels via Nanostructuring by Innovative Manufacturing Techniques (29.54 MB)
Irradiation Studies on Electron Beam Welded PM-HIP Pressure Vessel Steel (10.45 MB)
Nanodispersion Strengthened Metallic Composites with Enhanced Neutron Irradiation Tolerance (44.3 MB)
Fiber Sensor Fused Additive Manufacturing for Smart Component Fabrication for Nuclear Energy (2.64 MB)
Development of Low Temperature Spray Process for Manufacturing Fuel Cladding and Surface Modification of Reactor Components (9.46 MB)
Opportunities in Additive Manufacturing for Advanced Nuclear Energy Systems (3.22 MB)
Additive Manufacturing of BWR Lower Tie Plates (7.44 MB)
GAIN Overview (6.31 MB)
Integrated Computational Materials Engineering and In-Situ Process Monitoring for Rapid Qualification of LPB-AM Nuclear Components (3.01 MB)
Laser Additive Manufacturing of Grade 91 Steel for Affordable Nuclear Reactor Components (4.45 MB)
HIP Cladding and Joining to Manufacture Large Dissimilar Metal Structures for Modular and GEN IV Reactors (6.91 MB)
All-Position Cladding by Friction Stir Additive Manufacturing (FSAM) (15.77 MB)
Irradiation Performance Testing of Specimens Produced by Commercially Available Additive Manufacturing Techniques -- Part 1 (16.09 MB)
Irradiation Performance Testing of Specimens Produced by Commercially Available Additive Manufacturing Techniques -- Part 2 (57.41 MB)