ThruBit OH Logging CX(s) Applied: B2.6, B3.1, B3.7 Date: 11/28/2011 Location(s): Wyoming Offices(s): RMOTC
Office of NEPA Policy and Compliance
November 28, 2011
Estimated Read Time min
ThruBit OH Logging
CX(s) Applied: B2.6, B3.1, B3.7
Date: 11/28/2011
Location(s): Wyoming
Offices(s): RMOTC
The purpose of this project is to run a logging test on newly manufactured tools with various configurations of the tool string to see how overall sensor data changes. The tool string, on deployment will run with a full sensor sweep and will be about 85 feet long consisting of: 1) Telemetry Gamma Ray Tool; 2) Compensated Neutron Tool; 3) Sonic Tool; 4) Caliper Tool; 5) Array Induction Tool; 6) Various Ancillary devices to correctly position the tool string.
CX(s) Applied: B2.6, B3.1, B3.7
Date: 11/28/2011
Location(s): Wyoming
Offices(s): RMOTC
The purpose of this project is to run a logging test on newly manufactured tools with various configurations of the tool string to see how overall sensor data changes. The tool string, on deployment will run with a full sensor sweep and will be about 85 feet long consisting of: 1) Telemetry Gamma Ray Tool; 2) Compensated Neutron Tool; 3) Sonic Tool; 4) Caliper Tool; 5) Array Induction Tool; 6) Various Ancillary devices to correctly position the tool string.