Weld Actuator Crankarm to Input Shaft for RREX Fan Discharge Dampers CX(s) Applied: B1.3Date: 41871 Location(s): South CarolinaOffices(s): Savannah River Operations Office
Office of NEPA Policy and Compliance
August 20, 2014
Estimated Read Time min
Weld Actuator Crankarm to Input Shaft for RREX Fan Discharge Dampers
CX(s) Applied: B1.3
Date: 41871
Location(s): South Carolina
Offices(s): Savannah River Operations Office
Weld the actuator crankarm to the damper input shaft on HB-Line Room Exhaust (RREX) Fan #1 to prevent reoccurrence of the crankarm slipping. The individual vane linkage arms are currently tack welded to the associated shafts.
CX(s) Applied: B1.3
Date: 41871
Location(s): South Carolina
Offices(s): Savannah River Operations Office
Weld the actuator crankarm to the damper input shaft on HB-Line Room Exhaust (RREX) Fan #1 to prevent reoccurrence of the crankarm slipping. The individual vane linkage arms are currently tack welded to the associated shafts.