Specific Manufacturing Capability (SMC) Incinerator and Propane Tank System RemovalCX(s) Applied: B1.23Date: 03/22/2011Location(s): IdahoOffice(s): Nuclear Energy, Idaho Operations Office
Office of NEPA Policy and Compliance
March 22, 2011
Estimated Read Time min
Specific Manufacturing Capability (SMC) Incinerator and Propane Tank System Removal
CX(s) Applied: B1.23
Date: 03/22/2011
Location(s): Idaho
Office(s): Nuclear Energy, Idaho Operations Office
CX(s) Applied: B1.23
Date: 03/22/2011
Location(s): Idaho
Office(s): Nuclear Energy, Idaho Operations Office
The project will dismantle and remove the Specific Manufacturing Capability (SMC) refuse incinerator, the eighteen foot stack, and the associated propane tank system. All propane will be removed from the tank prior to physical removal. The incinerator is located on a cement slab approximately 20 meters northeast of building TAN-681 and is within the fenced perimeter of the SMC facility.