Technical information about fuel cells published in technical reports, conference proceedings, journal articles, and websites is provided here.

General

Transportation

Stationary/Distributed

2016: A Total Cost of Ownership Model for Low Temperature PEM Fuel Cells in Combined Heat and Power and Backup Power Applications (Lawrence Berkeley National Laboratory, February 2017)

Manufacturing Cost Analysis of 100 and 250 kW Fuel Cell Systems for Primary Power and Combined Heat and Power Applications (Battelle Memorial Institute, January 2017)

Manufacturing Cost Analysis of 1, 5, 10 and 25 kW Fuel Cell Systems for Primary Power and Combined Heat and Power Applications (Battelle Memorial Institute, January 2017)

Manufacturing Cost Analysis of PEM Fuel Cell Systems for 5- and 10-kW Backup Power Applications (Battelle Memorial Institute, October 2016)

Manufacturing Cost Analysis of 100 and 250 kW Fuel Cell Systems for Primary Power and Combined Heat and Power Applications (Battelle Memorial Institute, January 2016)

A Total Cost of Ownership Model for Solid Oxide Fuel Cells in Combined Heat and Power and Power-Only Applications (Lawrence Berkeley National Laboratory, December 2015)

Hydrogen Fuel Cell Performance as Telecommunications Backup Power in the United States (National Renewable Energy Laboratory, March 2015)

A Total Cost of Ownership Model for High Temperature PEM Fuel Cells in Combined Heat and Power Applications (Lawrence Berkeley National Laboratory, October 2014)

2014: A Total Cost of Ownership Model for Low Temperature PEM Fuel Cells in Combined Heat and Power and Backup Power Applications (Lawrence Berkeley National Laboratory, October 2014)

Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison (National Renewable Energy Laboratory, September 2014)

Fuel Quality Issues in Stationary Fuel Cell Systems (Argonne National Laboratory, November 2011)

1-10 kW Stationary Combined Heat and Power Systems Status and Technical Potential: Independent Review (National Renewable Energy Laboratory, November 2010)

Molten Carbonate and Phosphoric Acid Stationary Fuel Cells: Overview and Gap Analysis (National Renewable Energy Laboratory, September 2010)

Fuel Cycle Comparison of Distributed Power Generation Technologies (Argonne National Laboratory, November 2008)

Back to Top

Auxiliary and Portable Power

Manufacturing

Manufacturing Fuel Cell Manhattan Project (Office of Naval Research, November 2011)

Back to Top

Material Handling Equipment