Post Load Leak Test for 9975/9977/9978 Containment Vessels Using Model S1A-L2-V Leak TesterCX(s) Applied: B3.6Date: 07/12/2011Location(s): Aiken, South CarolinaOffice(s): Savannah River Operations Office
Office of NEPA Policy and Compliance
July 12, 2011
Estimated Read Time min
Post Load Leak Test for 9975/9977/9978 Containment Vessels Using Model S1A-L2-V Leak Tester
CX(s) Applied: B3.6
Date: 07/12/2011
Location(s): Aiken, South Carolina
Office(s): Savannah River Operations Office
CX(s) Applied: B3.6
Date: 07/12/2011
Location(s): Aiken, South Carolina
Office(s): Savannah River Operations Office
Post-Load Leak test of containment vessels that have been loaded with radioactive materials. The post-load leak test is done in accordance with a detailed procedure. During both the O-ring leak test and the test port plug test, we will pull a full vacuum on the test item (approximately 15 cubic centimeters for each test). Only room air will be pumped out by the vacuum pump. The dry vacuum pump will not emit any oil as part of its pumping process.