Notice of Proposed Rulemaking for( Energy Conservation Standards for Metal Halide lamp Fixtures CX(s) Applied: B5.1 Date: 01/04/2012 Location(s): Nationwide Offices(s): Energy Efficiency and Renewable Energy
Office of NEPA Policy and Compliance
January 4, 2012
Estimated Read Time min
Notice of Proposed Rulemaking for( Energy Conservation Standards for Metal Halide lamp Fixtures
CX(s) Applied: B5.1
Date: 01/04/2012
Location(s): Nationwide
Offices(s): Energy Efficiency and Renewable Energy
DOE proposes amended energy conservation standards for metal halide lamp fixtures. The proposed standards are the minimum allowable ballast efficiency based on fixture location, ballast type. and the rated wattage of the lamp. These proposed standards, if adopted, would apply to all products listed in Table 1.1 of the Notice of Proposed Rulemaking and manufactured in, or imported into, the United States on or after January 1, 2015.
CX(s) Applied: B5.1
Date: 01/04/2012
Location(s): Nationwide
Offices(s): Energy Efficiency and Renewable Energy
DOE proposes amended energy conservation standards for metal halide lamp fixtures. The proposed standards are the minimum allowable ballast efficiency based on fixture location, ballast type. and the rated wattage of the lamp. These proposed standards, if adopted, would apply to all products listed in Table 1.1 of the Notice of Proposed Rulemaking and manufactured in, or imported into, the United States on or after January 1, 2015.