Office of Science

Ghostly Images Could Ease Tracking of Fleeting Reactions

May 30, 2019

You are here

SLAC National Accelerator Laboratory researchers suggest taking advantage of the random spikes inherent in X-ray free electron laser pulses to study the pulses’ interactions with matter. The method is called pump-probe ghost imaging.
SLAC National Accelerator Laboratory researchers suggest taking advantage of the random spikes inherent in X-ray free electron laser pulses to study the pulses’ interactions with matter. The method is called pump-probe ghost imaging.
Image courtesy of Greg Stewart, SLAC National Accelerator Laboratory

The Science

If you want snapshots of the fastest processes occurring in solar cells or during a chemical reaction, you’d probably use X-ray free-electron lasers. The lasers produce incredibly short and bright pulses of light that enable sharp images of fast-moving atoms. Now, computer simulations suggest a new, simple way to use the lasers to observe the fastest behavior at atomic scales. The secret is applying a method known as ghost imaging. Simulations show this method could provide another useful tool for studying ultrafast activities. 

The Impact

In a typical X-ray pump-probe experiment, a “pump” pulse first excites a sample, and a time-delayed “probe” pulse measures how the system has changed during the delay. To map the full evolution of the system over time, scientists send pairs of X-ray pulses with lots of different time delays through a sample, creating a stop-motion movie of the tiny, fast motions. Producing two X-ray pulses with precisely controlled time delays can be difficult and time consuming. In their technique, called “pump-probe ghost imaging,” the team proposes using X-ray pulses directly from the laser without elaborate schemes to generate precisely timed pairs of pulses. It could save time and ease studies of fundamental interactions. 

Summary

To know how molecules act over time, such as in a solar cell or chemical reactor, researchers have used pairs of X-ray free electron laser pulses to excite and track ultrafast changes. A major challenge is the nature of the light pulses created by the X-ray lasers. Each pulse from the free-electron laser actually consists of a train of narrow X-ray spikes whose intensities and temporal separation vary randomly. To counteract the random changes and to generate precisely timed pairs of X-ray pulses, scientists must establish difficult beam setups. Now, researchers at SLAC propose an approach that embraces the randomness. They use a method referred to as pump-probe ghost imaging. Many pairs of spikes within an individual X-ray pulse produce measurements at multiple random time delays. By measuring the random separation of the spikes within each pulse and repeating the measurements over many X-ray pulses, the team could show how the system changed over time, like a stop-motion movie, with time resolution much shorter than the duration of the X-ray pulses themselves. So far, the team has tested the idea in simulations. Experimental validation is needed.

Contact

Daniel Ratner
SLAC National Accelerator Laboratory
dratner@slac.stanford.edu  

James Cryan
SLAC National Accelerator Laboratory
jcryan@slac.stanford.edu 

T.J. Lane
SLAC National Accelerator Laboratory 
tjlane@slac.stanford.edu

Funding

The Department of Energy (DOE) Office of Science supported this research through the Linac Coherent Light Source at the SLAC National Accelerator Laboratory (Office of Science, Basic Energy Sciences, Scientific User Facilities Division) and by the Office of Science, Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division.

Publications

D. Ratner, J.P. Cryan, T.J. Lane, S. Li, and G. Stupakov, “Pump-probe ghost imaging with SASE FELs.” Physical Review X 9, 011045 (2019). [DOI: 10.1103/PhysRevX.9.011045]

Related Links

SLAC press release: Ghostly X-ray images could provide key info for analyzing X-ray laser experiments