You are here

Home » Facility & Fleet Optimization » Energy-Efficient Products » Cost Savings Calculators » Energy Cost Calculator for Commercial Heat Pumps (5.4 >=< 20 Tons)

Vary equipment size, energy cost, hours of operation, and /or efficiency level.

INPUT SECTION
Input the following data (if any parameter is missing, calculator will set to default value). Defaults
Project Type    New Installation
Condenser Type    Air Source
Existing Capacity *    ton —
Existing Cooling Efficiency *    EER —
Existing Heating Efficiency *    COP —
Existing IPLV Efficiency *    IPLV —
New Capacity    ton 10 tons
New Cooling Efficiency    EER 10.1 EER
New Heating Efficiency    COP 3.2 COP
New IPLV Efficiency    IPLV 10.4 IPLV
Energy Cost $ per kWh $0.06 per kWh
Annual Hours of Operation for Cooling    hours 1500 hours
Annual Hours of Operation for Heating    hours 1500 hours
Quantity of Heat Pumps to be Purchased    unit(s) 1 unit
* Existing values should only be entered when Project Type is a replacement.
OUTPUT SECTION
Performance per
Heat Pump		 Your
Choice		 Existing
Heat Pump		 Base
Model		 FEMP
Recommended
Level		 Best
Available
Cooling Efficiency     EER            
Heating Efficiency     COP            
IPLV Efficiency     IPLV            
Annual Energy Use     kWh            
Annual Energy Costs $ $ $ $ $
Lifetime Energy Costs $ $ $ $ $
Lifetime Energy Cost Savings $ $ $ $ $
Lifetime Energy Cost Savings for Heat Pump(s) $ $ $ $ $

Your selection of a ton heat pump will have a $ energy cost savings per heat pump over an estimated 15 year life expectancy compared to the base model.