DOE Tour of Zero: The Lakeside Cottage by BPC Green Builders
Photos
1/11
BPC Green earned a U.S. DOE Zero Energy Ready Home certification on this ultra-efficient lakeside cabin in west Connecticut.
Photo courtesy of BPC Green Builders
2/11
BPC Green’s two-story cottage features a south-facing roof that provides maximum space to install solar panels in the future. In addition this roof orientation maximizes natural comfort because the overhang allows low-angle sunlight through large south-facing windows in the winter and shades high-angle sunlight in the summer.
Photo courtesy of BPC Green Builders
3/11
One ultra-efficient ductless heat pump is all the ultra-efficient 1,680-square-foot home needs for heating and cooling.
Photo courtesy of BPC Green Builders
4/11
The home has energy-saving attic perimeter insulation thanks to raised heel trusses that provide added depth for an ultra-efficient 24-inch layer of R-86 cellulose insulation that completely covers the attic floor all the way to the edge.
Photo courtesy of BPC Green Builders
5/11
Comprehensive draft protection is achieved by sealing all of the plywood sheathing seams with tape then covering the home with two layers of rigid closed cell foam board, which forms a continuous exterior thermal blanket.
Photo courtesy of BPC Green Builders
6/11
The complete dry-by-design wall system includes draining house wrap between the two layers of rigid foam board, taping the seams of the second foil-faced layer to form a water barrier, and installing furring strips to provide an air gap between the insulation and the siding.
Photo courtesy of BPC Green Builders
7/11
The ultra-efficient foundation insulation includes R-28 of rigid foam at the perimeter and 18 inches below grade.
Photo courtesy of BPC Green Builders
8/11
A slab foundation was added next to the existing uninsulated staggered-height basement, doubling the size of the home’s original footprint. The new slab was poured over an ultra-efficient R-55 rigid foam foundation insulation.
Photo courtesy of BPC Green Builders
9/11
The enhanced comfort floor insulation includes 2.5 inches of closed-cell plus 5.5 inches of open-cell spray foam in the floor joists above the existing basement as well as the thick rigid foam layer under the newly poured slab foundation.
Photo courtesy of BPC Green Builders
10/11
Taping the plywood sheathing seams is one step in the comprehensive draft protection scheme.
Photo courtesy of BPC Green Builders
11/11
The taped plywood seams in the cathedral ceiling serve as part of the advanced home sealing strategy.