DOE Tour of Zero: The Isler Residence by Clifton View Homes
Photos
1/23
This custom home built on Whidbey Island in Washington state by Clifton View Homes is a certified U.S. DOE Zero Energy Ready Home that will save its homeowners more than $2,500 a year compared to a home built to minimum code.
Photo courtesy of Clifton View Homes
2/23
The 2,908-square-foot home was designed with the majority of the windows facing south to take advantage of the Puget Sound views, natural comfort, and daylight.
Photo courtesy of Clifton View Homes
3/23
The roof design of this solar-electric-ready home has enough south-facing area to hold at least a 9 kW solar photovoltaic system, which can meet the electric needs of both the home and a car. All of the wiring is in place for solar panels on the rooftop and an electric vehicle charging station in the garage.
Photo courtesy of Clifton View Homes
4/23
Solar window shading uses deep overhangs and covered porches to block out much of the high overhead summer sun while allowing in beneficial low winter sun.
Photo courtesy of Clifton View Homes
5/23
The home’s dry-by-design wall construction includes structural insulated panel walls with sealed seams covered by corrugated house wrap and naturally durable stained cedar and stone cladding.
Photo courtesy of Clifton View Homes
6/23
Solar window shading details include the roof overhang protecting the balcony, which in turn shades the windows below it.
Photo courtesy of Clifton View Homes
7/23
The water-saving landscape design uses only native and drought-tolerant plants for zero-water irrigation.
Photo courtesy of Clifton View Homes
8/23
Even on cloudy days, light pours in through the south-facing windows to fill the home with natural daylight.
Photo courtesy of Clifton View Homes
9/23
All of the floors consist of scored, stained, and sealed concrete, which provides thermal mass that avoids overheating during the day and stored heat at night as a critical part of the home’s natural comfort system.
Photo courtesy of Clifton View Homes
10/23
The home’s concrete floors absorb heat from the sun during the day and radiate that warmth back into the home at night, providing a natural comfort balancing system that reduces the home’s electric heating and cooling loads.
Photo courtesy of Clifton View Homes
11/23
Advanced solid-state and compact fluorescent lighting technology and ultra-efficient appliances help contribute to low utility bills.
Photo courtesy of Clifton View Homes
12/23
The ultra-efficient dishwasher, clothes washer, and refrigerator are not only ENERGY STAR-rated but also the lowest energy-use products in their respective categories.
Photo courtesy of Clifton View Homes
13/23
The stained and scored concrete flooring stores and releases natural heat and delivers radiant floor heat from an ultra-efficient geo heat pump.
Photo courtesy of Clifton View Homes
14/23
The home is equipped with several ENERGY STAR-labeled high-efficiency ceiling fans.
Photo courtesy of Clifton View Homes
15/23
All of the paints and stains in the home are certified low-/no-VOC finishes to help ensure a healthful indoor environment and to comply with the requirements of the EPA’s Indoor airPLUS program.
Photo courtesy of Clifton View Homes
16/23
Although many Pacific Northwest home builders install air conditioners in new homes, this home uses a combination of alternative technologies including ceiling fans, operable windows, passive thermal mass cooling, and an innovative fresh air cooling system that uses fans to draw in cool morning air and exhaust excess heat out of the home.
Photo courtesy of Clifton View Homes
17/23
The home’s ultra-efficient, triple-pane windows have insulated fiberglass frames and special clear coatings that minimize the transfer of heat through the glass.
Photo courtesy of Clifton View Homes
18/23
Water-saving fixtures reduce both water and energy use.
Photo courtesy of Clifton View Homes
19/23
The structural insulated panel (SIP) construction provides inherently airtight walls and an attic that is enhanced with spray foam sealing at the rim joists for comprehensive draft protection.
Photo courtesy of Clifton View Homes
20/23
When the seams of the panels are sealed with caulk or tape, the SIP panels used for both the walls and roof provide a whole-house draft barrier.
Photo courtesy of Clifton View Homes
21/23
The nearly 10-inch-thick (R-41) SIP roof panels provide ultra-efficient attic insulation.
Photo courtesy of Clifton View Homes
22/23
The SIP construction system panels come to the site precut for quick assembly and provide a continuous thermal blanket around the home.
Photo courtesy of Clifton View Homes
23/23
An ultra-efficient layer of R-20 rigid foam foundation insulation covers the ground underneath the vapor barrier to reduce heat loss from the radiant floor loop in the slab floor.