DOE Tour of Zero: Mt. Baker House by Dwell Development
Photos
1/10
Dwell Development built this 3,180-square-foot custom home in Seattle, Washington, to the high performance criteria of the U.S. Department of Energy Zero Energy Ready Home (ZERH) program.
Photo courtesy of Dwell Development
2/10
Reclaimed barn wood provides a striking exterior for this high-performance home.
Photo courtesy of Dwell Development
3/10
Beneath the reclaimed metal and wood siding the 2-by-6 walls are dense packed with R-23 of fiberglass insulation, and covered with OSB that is protected by a seamless layer of fluid-applied weather barrier.
Photo courtesy of Dwell Development
4/10
The high-performance triple-pane, low-emissivity windows minimize heat loss while flooding every floor with natural light.
Photo courtesy of Dwell Development
5/10
Pervious pavers allow rainwater to percolate into the soil on site rather than flowing into the street.
Photo courtesy of Dwell Development
6/10
A variety of balconies and patios encourage the natural ventilation of open doors despite the tight urban lot lines.
Photo courtesy of Dwell Development
7/10
The heat recovery ventilator fresh air system provides continuous exhaust balanced with filtered fresh air.
Photo courtesy of Dwell Development
8/10
High-performance ENERGY STAR appliances save energy and water.
Photo courtesy of Dwell Development
“Our mission is to build every home with the ability to produce the same amount of energy as it consumes.”
– Anthony Maschmedt, builder, Dwell Development, LLC
“With an airtight envelope, thorough insulation, and protection from the elements, these homes maintain consistent, high-quality air temperature year-round. Each component is designed to utilize as little energy as possible. From smart, integrated control systems to radiant floor heating, sustainability has never been so easy –- or felt so good. Our mission is to build every home with the ability to produce the same amount of energy as it consumes.”
– Anthony Maschmedt, builder, Dwell Development, LLC
