You are here

MidAmerican Energy (Electric) - Commercial EnergyAdvantage Rebate Program

Savings Category 
Heat Pumps
Maximum Rebate 

Insulation: 70% of cost; ebates exceeding $10,000 require preapproval
Variable-Speed Drives: 70% of cost
Custom: All project installations with rebates exceeding $20,000 require on-site verification

Program Info
Program Type 
Utility Rebate Program
Rebate Amount 

Variable-Speed Drives: $30/HP
Vending Machine Controller: $50
CFL Lamp: up to $2/lamp
CFL Fixture (Hardwired): $10/fixture
T5/T8 Fluorescent Lighting: $6-$16/fixture
Fluorescent Low-Bay Fixtures: $25/fixture
Lighting Occupancy Sensors: $20/sensor
Metal Halide Lamp: $3/lamp
Pulse Start Metal Halide Fixture: $15/unit
LED Exit Sign: $5/sign
LED Traffic Lighting: $15-$60/retrofit
LED Refrigerated Case Lighting: $50/door; $20/sensor
LED Recessed Downlights: $25
LED Canopy/Parking/High-Bay: $150 - $200
Room Air Conditioners: $25
Central Air Conditioners: ($50 x (EER)) x tons or up to $400
Air/Water Source Heat Pumps: ($50 x (EER – 9.9)) x tons or up to $600
Packaged Terminal A/C or Heat Pumps: $50/unit
Geothermal Heat Pumps: $300/heating ton plus $300/ton ground loop
Desuperheater: $100/unit
Chillers: ($400 x kW/ton + $10) x tons
Programmable Thermostats: $20
Motors: $15 - $2,480
Cooking/Refrigeration Equipment: Varies greatly
Attic/Roof/Ceiling Insulation: $0.015/R-value increase per sq. ft
Sidewall Insulation: $0.01/R-value increase per sq. ft.
Custom: Varies; determined by incremental cost, peak demand reduction, annual energy use reduction and annual energy cost savings

MidAmerican Energy Company

MidAmerican Energy offers a variety of energy efficiency rebate programs to its nonresidential customers located in Illinois. The amount of the rebate varies greatly depending on the technology, its size and efficiency. Brochures that contain the details of rebate amounts and a rebate application can be accessed via the web site above.

Rebates must be submitted within three months of equipment installation in existing buildings and within six months of equipment installation in new construction. An itemized and dated invoice from the contractor must accompany the equipment application and must include details about the sizes and efficiency of all equipment. MidAmerican Energy also offers a custom system rebate for projects that improve energy efficiency but may not fit into the prescribed rebate programs.

MidAmerican Energy also offers the BusinessCheck program, which is a free on-site energy audit service for small commercial facilities. An energy specialist will give recommendations and have several energy efficient options ready to install during the visit. Audit applications are available from the BusinessCheck Program web site. The Non-Residential Energy Analysis Program and Commercial New Construction Program also provide incentives and no cost services to eligible non-residential customers.