Simple and inexpensive actions can help you save energy and money during the cool fall and winter months. | Photo courtesy of ©iStockphoto.com.
This article will help you find strategies to help you save energy during the cool fall and cold winter months. Some of the tips below are free and can be used on a daily basis to increase your savings; others are simple and inexpensive actions you can take to ensure maximum savings through the winter.
If you haven't already, conduct an energy assessment to find out where you can save the most, and consider making a larger investment for long-term energy savings.
Also check out no-cost and low-cost tips to save energy during the spring and summer.
Take Advantage of Heat from the Sun
- Open curtains on your south-facing windows during the day to allow sunlight to naturally heat your home, and close them at night to reduce the chill you may feel from cold windows.
Cover Drafty Windows
- Use a heavy-duty, clear plastic sheet on a frame or tape clear plastic film to the inside of your window frames during the cold winter months. Make sure the plastic is sealed tightly to the frame to help reduce infiltration.
- Install tight-fitting, insulating drapes or shades on windows that feel drafty after weatherizing.
Find out about other window treatments and coverings that can improve energy efficiency.
Adjust the Temperature
- When you are home and awake, set your thermostat as low as is comfortable.
- When you are asleep or out of the house, turn your thermostat back 10° to 15° for eight hours and save around 10% a year on your heating and cooling bills. A programmable thermostat can make it easy to set back your temperature.
Find out how to operate your thermostat for maximum energy savings. Also see ENERGY STAR's June 5, 2008, podcast for video instructions on operating your programmable thermostat.
Find and Seal Leaks
- Seal the air leaks around utility cut-throughs for pipes ("plumbing penetrations"), gaps around chimneys and recessed lights in insulated ceilings, and unfinished spaces behind cupboards and closets.
Find out how to detect air leaks.
Learn more about air sealing new and existing homes.
- Add caulk or weatherstripping to seal air leaks around leaky doors and windows.
Find out how to select and apply the appropriate caulk.
Learn how to select and apply weatherstripping.
Maintain Your Heating Systems
- Schedule service for your heating system.
Find out what maintenance is required to keep your heating system operating efficiently.
- Furnaces: Replace your furnace filter once a month or as needed.
Find out more about maintaining your furnace or boiler.
- Wood- and Pellet-Burning Heaters: Clean the flue vent regularly and clean the inside of the appliance with a wire brush periodically to ensure that your home is heated efficiently.
Find other maintenance recommendations for wood- and pellet-burning appliances.
Reduce Heat Loss from the Fireplace
- Keep your fireplace damper closed unless a fire is burning. Keeping the damper open is like keeping a window wide open during the winter; it allows warm air to go right up the chimney.
- When you use the fireplace, reduce heat loss by opening dampers in the bottom of the firebox (if provided) or open the nearest window slightly--approximately 1 inch--and close doors leading into the room. Lower the thermostat setting to between 50° and 55°F.
- If you never use your fireplace, plug and seal the chimney flue.
- If you do use the fireplace, install tempered glass doors and a heat-air exchange system that blows warmed air back into the room.
- Check the seal on the fireplace flue damper and make it as snug as possible.
- Purchase grates made of C-shaped metal tubes to draw cool room air into the fireplace and circulate warm air back into the room.
- Add caulking around the fireplace hearth.
Find out more techniques to improve your fireplace or wood-burning appliance's efficiency.
Learn tips for safe and efficient fireplace installation and wood burning.
Lower Your Water Heating Costs
Water heating accounts for about 18% of the energy consumed in your home.
- Turn down the temperature of your water heater to the warm setting (120°F). You'll not only save energy, you'll avoid scalding your hands.
Find other strategies for energy-efficient water heating.